Search
Search
PRODUCTS
All categories
Dryer
Dryer is mainly used for drying materials with humidity or granularity in the industries of mining, construction material, metallurgy and chemical. And it has strong adaptability to the materials and can dry various materials. Besides, it has simple structure and reliable operation.
In our company, this series applies the new type scatter plate device, and it has many functions, such as direction guide, flow equalization, scattering material and so on. And it can make the material uniformly distributed at radial cross section. Contact the heat airflow completely and use the heat energy fully. Moreover, it adopts reasonable operational parameter, and compared with general dryers, it reduces the coal and power consumption by more than 10-15%, and increases the output by more than 10-15%. At present, it is widely used in cement and mining industries.
Product Description
|
产品规格 Spec. （m）
|
生产能力 Capacity （t/h） |
主机电 Main motor |
主减速机 Main reducer |
重量 Weight （t） |
||
|
功率 Power (kw) |
型号 Model |
型号 Model |
速比 Ratio |
|||
|
Φ1.2×10 |
6-8 |
7.5 |
Y |
ZL50-16-1 |
31.5 |
12.5 |
|
Φ1.5×12 |
8-12 |
15 |
Y |
JZQ500-III |
31.5 |
16.5 |
|
Φ1.5×15 |
12-16 |
18.5 |
Y |
JZQ500-III |
31.5 |
18 |
|
Φ1.8×12 |
18-20 |
18.5 |
Y |
ZQ50-16II-2 |
31.5 |
20 |
|
Φ2.2×12 |
22-28 |
22 |
Y |
JZQ650-III |
31.5 |
37.6 |
|
Φ2.2×14 |
26-30 |
22 |
Y |
JZQ750-III |
31.5 |
40 |
|
Φ2.4×14 |
30-35 |
30 |
Y |
JZQ750-III |
31.5 |
51 |
|
Φ2.4×18 |
35-40 |
37 |
Y |
ZL85-13-1 |
27.16 |
54 |
|
Φ2.4×20 |
38-42 |
37 |
Y |
ZL85-13-1 |
27.16 |
54.14 |
|
Φ2.8×20 |
43-50 |
45 |
Y280S-6 |
ZL85-13-1 |
27.16 |
71 |
|
Φ3×20 |
45-55 |
55 |
Y |
ZL100-16-1 |
41.52 |
78 |
|
Φ3×25 |
58-70 |
75 |
YR |
ZL100-16-1 |
41.52 |
93 |
|
Φ3.2×25 |
75-90 |
90 |
Y |
ZSY315-22-Ⅱ |
22.4 |
156 |
|
Φ3.6×25 |
95-110 |
160 |
Y |
ZSY500-35 |
35.5 |
170 |
|
Φ3.6×28 |
80-140 |
200 |
Y |
ZSY500-35 |
35.5 |
180 |
Parts Number
Previous
Ball Mill
022
DRY02
DRY03
DRY04
DRY05
DRY06
ONLINE MESSAGE
Listen to the voice of every customer
客户留言
Description:
Products Range
Bowl Liner, Concave and Mantle, Jaw Plate, Shredder Hammer, Blow Bar, Impact Plate, Break Plates, VSI Parts, PLFC Parts, Mill Liner, Rotor Tip, Cavity Plate, Feed Eye Ring, Feed Tube, Feed Plate, Top Upper Lower Wear Plate, Rotor, Eccentric Shaft, Main Shaft, Shaft Sleeve, Bronze Bushing, Shaft Cap Swing Jaw, Original Shanbao Design Crushers, and so on.
Material: Mn13Cr2, Mn18Cr2, Mn22Cr2, Cr30, Cr26, Cr27Mo1, Cr27Mo2, Ceramic Insert, Carbon Steel Insert, Mn13Mo, Mn18Mo…
Contact
DENP Industrial
( Cell Phone / WhatsApp / WeChat )
About us
Founded in 2010, a global manufacturer and supplier of crusher wear parts and spare parts. DENP Foundry takes up 15000 square meters, and produce capacity of around 9000 tons annually, 84 workers and 7 engineers. So if you are looking for crusher wear parts and spare parts.
DENP Industrial deserves your attention!
